Concrete Block Manufacturing
1 Million Bricks Per Mould
Using the Buildworks block machine and our metal moulds you can make over 1 million bricks per mould.
Moulds Usable For Years
Our high quality block moulds are designed to give years of trouble-free use. You can make hollow or solid concrete blocks in the same mould.
High Structural Strength
Vibration is used to produce high density blocks with a lower water content. High structural strength can be achieved with lower cement content.
Moulds Can Be Repeatedly Used On The Same Day
The block mould is a casting mould which means the mould is removed whilst the concrete is still wet allowing the mould to be used repeatedly the same day. The steel moulds are filled with concrete vibrated, turned over and removed leaving the blocks to cure.
300 Moulds per day
A Perfect Brick Look and Feel
The finished system reproduces perfectly the traditional building technique of laid bricks.
Longevity and Accuracy
Using the Buildworks block machine and our polypropylene and polyurethane moulds which give longevity and accuracy in precast block creation.
Don’t Need Skilled Labour
This precast block can be laid without mortar and therefore utilise unskilled labour. There is no need to cut blocks for windows and doors and corners as we have individual moulds for these.
Can Use Waste Materials
When stacked together the blocks form a system of horizontal voids. These voids act as insulation and can be filled with waste material like paper and plastic.
Easy To Fit Pipes and Cables
The voids between the bricks make it easy to place conduit for pipes, cables etc
400 Bricks Output on a Manual Machine
Output is 400 bricks per day on manual machine and 1000 on electric machine.
Inter Locking Block Manufacturing
Quicker to set than traditional blocks so faster manufacturing time.
Minimum Mortar Needed
Only the first course of blocks needs to be mortared to the foundation
Rapid Build Time
The build time is rapid reducing costs
No Height Build Restriction
There is no height restriction governed by mortar as all blocks are placed dry on top of one another.
Light Weight Bricks
The blocks are light weight and comply with lifting regulations.
Roof Tile Manufacturing
Buildworks Roof Tile Machine
Using the Buildworks Roof Tile machine and our polypropylene and polyurethane moulds you can make roof and floor tiles
Moulds usable for 10 years High Durability
Our high quality injection moulded roof tiles will last 40 years minimum.
Improved Thermo insulating properties
Lightweight concrete tiles provide a high quality, affordable roof. The roof has much better thermo insulating properties to live under than steel sheets and provides noise reduction.
Water collected from the roof will also be clean enough for drinking.
500 tiles a day.
Fast setting floors
Cures quicker and with reduced form work.
Variety of uses
Can be used to build small bridges, commercial buildings and for a wide range of buildings.
Bring accommodation above ground
Can build affordable homes off the ground. This helps reduce the impact of flooding on communities. Safe building technique for wetlands
Save 1/3 on Construction costs and reduced form work with up to 40% material saving.
4 Floor Buildings
Using the Buildworks machine we have developed solutions for multi-story construction.
4 Floor Buildings
Using an innovative waffle system and combined with our block system you can construct up to a 4 floor building
Major Construction Costs
The pre cast waffle floor system uses significantly less material saving cost and construction costs and time.
No Need To Lift Heavy Equipment
Floor building without any heavy lifting equipment, using less concrete & less reinforcement
Save 1/3 on Construction costs
Paving Block Manufacturing
Show Village” and Training Centre in Worcestershire UK.
Buildworks has developed a purpose built “show village” and training centre in Worcestershire UK. This is open for anyone to visit and see the machines in action and also completed buildings
NGO’s, Development bodies and private companies can visit and work with our on site engineers to plan programs
We are also establishing similar regional centres across Africa.
This centre is also used to train the trainer events
We offer a range of independent solar solutions for homes and buildings.
Ranging in sizes for 0.5kva up to 10 kva for individual buildings.
We also partner with a larger solutions provider for villages and larger power supplies.
Sign up to hear from us about specials, sales, and events.